Archive for the 'Dagger' Category

09
Nov
08

How to be Kawaii in a Cruel, Cruel World…

OK, so every now and then I run into weapons that cause a big ‘ol grin to split across the face of yours truly. And i don’t mean a grimace of pain from a horrible weapon, but rather from quirky looking weapons that are actually very well designed, but posses some unique quality that just makes them… cute.

There. I said it. Not just cool. But cute. I’m gonna have to wash my mouth out with concentrated hydrochloric acid after this post, but here it is:

Black Cat Defense Key Chain

Black Cat Defense Key Chain

[click image to view full size]

This is the Black Cat defense Keychain. 🙂 Yeah. I had the same reaction. Basically a small stainless steel keychain ornament, finished in black made in the shape of a sitting, wide eyed black cat. My favorite kind of cat, too, just fyi.

Yes, yes chuckle/giggle all you like, I was impressed. First because this design actually makes for a very potent weapon. I mean look at it. Really look at it. It’s a mini punch dagger. An innocuous, easy to use hand weapon. In black. In an remarkably non threatening (some would say cute) form factor.

Perfect for anyone who didn’t want to be blatantly carrying a weapon around, but still wants a little extra protection. Ok, I’m done. Can’t go any further with this without permanently scarring my masculinity…

At least they didn’t try to do this in a “Hello Kitty” form factor… *shiver* I might have had to kill someone to get my testosterone levels back up…

Black Cat Defense Keychain – [True Swords]

06
Nov
08

The Zombies Ate My Brain…

I’m guessing it was while I wasn’t looking. During a movie. Resident Evil, to be specific. How do I know this? Because I just ran into a weapon that is supposedly from the movie RE, and I cannot, for the life (or brains) of me, remember anything remotely similar being in the movie…

Alices Zombie Extinction Arm Spikes - AKA Zombie Killing Kunai

Alice's Zombie Extinction Arm Spikes - AKA Zombie Killing Kunai

[click image to view full size]

Ok, so what are these? Well, to be honest, I haven’t the foggiest. Prolly on account of my brains being consumed and all. But I can certainly try to determine how they might be used…

So what these look like are a set of cast alloy spikes, with a faux Kunai four sided diamond like cross section. With a ring on top. Again like a kunai. What little is left of my brain is getting very suspicious.

Each side if the spike is cast with a rectangular parallelogram. Why? I dunno. But a pattern appears to be emerging. They are thick, low quality castings (like a Kunai) have a ring (like a kunai) come in multiples (Much like Kunai) and even have a leather wrist holster (Can anyone say “Ninja “?)

And to top it all off, I do not recall seeing anything like this in any of the Resident Evil movies… So here’s what I think the real story is. Some enterprising knife designer decided to design an “original” kunai. For some reason, they don’t sell. Then marketing hits on a brilliant idea:

Brand it as a weapon used by a popular (and pretty) protagonist (Alice), from a popular series of movies- Resident Evil. Voila! Alice now uses Kunai to kill Zombies… Alllllrighty then.

Any questions?

Alices Zombie Extinction Arm spikes Kunai – [True Swords]

04
Nov
08

Introducing: The Gun Katar

I’m not really into politics, however it appears that the Good ‘ol U. S. of A. is going to have it’s first African American President. Now while that is of itself a noteworthy and landmark occurrence, as the transition from slavery to presidency is no mean feat, I’m also hoping it will bring with it important changes. Like an improved economy. Reduced national deficits. Better international relationships. You know. Good Presidential stuff.

However we will just have to wait and see. Politicians are politicians after all, it doesn’t matter whether they are black or white, which is a fact many seem to have forgotten. The proof is in the pudding. Whatever that means… I never really liked pudding anyway. Only time will tell how well campaign promises equate to results…

Anyway, in honor of this momentous occasion, I thought I’d break out a beauty of a weapon I ran into a while back. I have done a few gunblade posts in the past, but none of them compare to the sweetness that is the Gun Katar:

Gun Katar

Gun Katar

[click image to view full size]

Is that not completely and uncompromisingly awesome? Now this is a weapon for which a Gun Kata would make practical sense. Yes, A Gun Kata. You know, that little gun dance that seemed to occur at random in the movie “Equilbrium”? The one with Christian Bale before he became the “Dark Knight? Yeah. That one. Go look up Gun Kata (not Katar) on the YouTubes or something. But I’m ranting here. Back to Gun Katar goodness.

What you are looking at here is a Katar, a traditional Indian punch dagger, primarily a thrusting  weapon, often designed to penetrate chain mail armored opponents. It has a thick wedge shaped blade, and unlike most other weapons, the blade is held vertically, by a grip and a set of side bars that sit at right angles to the blade.

Gun Katar - Side View

Gun Katar - Side View

[click image to view full size]

This one is a particularly ornate one, featuring some very intricate engravings. You can see an elephant and a boar on one side, as well as flowers, leaves in the center area where the blade emerges, and other traditional Indian adornments.

Gun Katar - Engravings

Gun Katar - Engravings

[click image to view full size]

Gun Katar - Engravings

Gun Katar - Engravings

[click image to view full size]

Like many other katar, this features a double bar center grip, with the traditional side bars that run down either side of the blade and acts as guard as well as added support for the weapon.

Gun Katar - Side Guards

Gun Katar - Side Guards

[click image to view full size]

Under normal circumstances, that would be the sum total of the design of a traditional Katar. Except this one takes quite a hike from the traditional beaten Katar path. This Katar is loaded. With black powder. A double charge no less… 🙂

Gun Katar - Flintlock Pistol Barrel

Gun Katar - Flintlock Pistol Barrel

[click image to view full size]

This Katar is sporting a pair of flint lock pistols, one attached to either side of the weapon. If you look closely at the grip, you can see a pair of triggers recessed into the front bar, one at the top and one at the bottom.

Gun Katar - Flintlock Pistol Triggers

Gun Katar - Flintlock Pistol Triggers

[click image to view full size]

As you can probably imagine, a person wielding this in battle would have a healthy advantage over your poorly equipped standard Katar wielding schlub. I can just imagine how confrontations with the original owner of this weapon would have ended. Indiana Jones style.

I love weapons that make the old saying: “never bring a knife to a gun fight.” redundant… 😉

Anyway I thought this was a cool weapon for a special day… There are one or two more pics at the link after the jump. Here’s to great things in our future… 🙂

Peace!

Gun Katar – [CollectorEbooks.com]

04
Oct
08

Cool Kunai…

If you were following my last few posts, you may remember a comment I made about the cutlery industries use of “Metal” (aka cheap cast alloys) to form certain sword parts (usually the hilt), in spite of the fact that steel is relatively cheap.

Now I will readily admit that steel is much harder to work into complex shapes than it is to case an alloy, but still, there are some times when steel is the right thing to do. Like with these Kunai:

Red Kunai

Red Kunai

[click image to view full size]

Now the beauty of these kunai is that they have been designed for throwing use, which usually means all steel (usually a high carbon or spring steel) construction, and a properly balanced design. Now these  Kunai have been modeled after those used in the Naruto series, and barring the use of a red grip wrap as opposed to the white wraps used in the anime, are a fairly close approximation.

But more importantly, notwithstanding that this particular kunai design is not really the ideal for throwing (Yes, you heard right, in spite of all the anime hype, they are not the best throwing knife design) the fact remains that they will probably be made from steel. Sweet, sweet steel.

No alloys, no resins, no cheapo construction… Well maybe a *little* cheapo construction methodolgy, but not with cheap materials, making this one of the best replica anime Kunai that I am aware of today. And IMHO, the fact that it is steel alone, would probably make it worth having.

And incidentally for the curious among you, i’ll explain my whole “not the ideal throwing implement” comment. An ideal throwing knife should be able to be thrown either from the tip or the grip. This design will make a great tip thrower, but the large abrupt ring on the grip increases the chances that it would hang up in the hand if thrown from the grip.

that ring could also makes it a little harder to balance, (which is important for other reasons) though that could theoretically be figured out during the design stage. The topic of what makes an ideal throwing knife is one I think I will dedicate a post to in the future because it is quite the interesting one. But I digress.

My point is, I really wish knife designers could do the same for every knife they designed and made. Real grips, not alloys, proper steels, etc. I know it’s an unreasonable request, but if they did, they would make lots of folks, like me, happier than a foody at a food fair…

We’d also be perpetually broke for the rest of our natural lives, but so long as I got to adorn the walls of my cave with lots and lots of cool, well constructed swords, I don’t think I’d mind all that much… 😀

Red Kunai – [True Swords]

20
Sep
08

A fancy pushdagger i could like…

A buddy of mine, Sinza from over at the “Exotic Automatic” forum (you should go check it out: http://sinza.forumotion.com) sent in a link to an interesting weapon a while back. It’s basically a pushdagger, to be exact, and a rather ornate one at that, but this one gets brownie points because it just so happens that it bears my name:

Fire Blade

Fire Blade

Ok, so we don’t have exactly the same name, but it’s close enough. Go figure, a genuine Fire Blade! And, the cool thing is, unlike the many other really flashy but useless pieces I run into all the time, this one is actually usable. Ergonomically designed even… Yay for our side!!

So what we have here is a really flashy punch dagger design, with basically has three blades, all attached to the an ornately cast “T” shaped grip, with the center blade attached to the center stem of the “T” which expands out into a smaller, internal sub guard over the center finger area, and each additional blade attached to either side of the main grip.

As grips go, this one is very elaborately designed, with an organic, almost coral like motif cast into the surface of the entire grip. At either side of the palm side of the grip, extend what looks like little set of branches arcing upwards towards the wielder.

Moving down past that we see the ends of the grip both angle down towards the front blade, while, from the center of the grip, extends a short stalk. And at the ends of each of these points, we have our blades. An unusual feature of this grip is that it has multiple choils, of finger guides, along the front, theoretically to give you a better grip. Ergonomics at work.

But it is the blades where the magic happens. Most notably on the side blades. Each side blade is cut into an interesting Asian flame pattern, with the flame front sporting a rather wicked looking edge on either side. the center blade is less obviously flame patterned, featuring two side licking flames, and a split center blade.

All in all, a rather flamboyant design, but not too bad in the practicality department either. The side blades appear to be fairly sturdily attached, and assuming they have more than a short stub tang embedded in the handle casting, should be fairly strong, and take side slashing duty fairly effortlessly.

The center blade, well, I’d much have preferred to see a slightly thicker center stem, however for thrust duty, (again assuming a more than minimal tang) it should suffice. I Just wouldn’t try anything that might place shearing forces on that particular joint. It’s a design flaw that seem very common with decorative push dagger designs.

Overall, this design is a little overboard on the fancy flash factor for yours truly, but it’s certainly a practically feasible design. And given it’s name, it just had to get a post… Call me biased… 😀

Fire Blade – [Ninja-Weapons]

Exotic Automatic – [http://sinza.forumotion.com]

30
Aug
08

An Evil Push Dagger of Doom!

I’ve posted a relatively fair share of what I consider “battle blades”, but today I thought I’d show you a rather interesting blade, one that, contrary to the other extravagant steel art I’ve been blogging about, looks like it would actually be rather wickedly effective. Yep. I’d like you to meet… the Interceptor:

Interceptor

Interceptor

Now that, my friends is evil. My kind of evil. Edges and curves and points. Oh My! :-}

Ok, back to intercepting. This appears to be a weapon modeled after a push dagger, except based on the brass knuckles form factor we first ran into in Tom Andersons Pantera Claws. Essentially, it’s a pair of wood scaled brass knuckles, (in steel) with a set of blades attached forward and to either side of the knuckles.

In essence, a push dagger. With a little extra. And a mean little push dagger it is. Well, perhaps not so little. It is significantly larger than any traditional push dagger, but in this case, this is not an unwelcome characteristic. Out front, we have two large forward blades, with forward pointing tips and outward facing edges.

On either side of the finger voids, we have one additional blade, edges facing out. All four blades have a little semicircular divot which seems to serve no other purpose than aesthetic style. Not the kind of thing I’d do, but they doesn’t seem to create any particularly bad weaknesses, so I’ll move on. The blade seems to be attached via a set of small screws, which might be the only major weakness I can see.

But beyond that, it seems like it would be a genuinely effective tool. Clearly, as a punch dagger, this would be killer (excuse the pun), no questions. The side blades, on the other hand, might see some limited effectiveness if the blade was used in a side hammer fist, though I’d probably not want to try to cut anything like that with the forward blades, unless you really won’t need the use of your fingers afterwards.

But when all is said and done, it’s sheer wickedness… Well, what more can I say… Look at it yourself and form your own conclusions… 😉

Interceptor – [eBlade Store]

31
Jul
08

Unpushable Spider Legged Push Daggers…

So today I thought I’d post about an little push dagger that… Can’t really be used as a push dagger:

Skull Spider

click image to view full size

click image to view full size

Ah yes… The classic tenets of form following whatever the heck suits the knife maker at the moment… *Sigh*

Now don’t get me wrong. I do like the aesthetics of this blade. the combination of a skull head with spider legs is actually quite a cool concept, and apart from a couple of the legs emanating from weird angles, I like the overall design.

Except I wish they would have used it as something other than the grip of a weapon for whom the grip shape is particularly relevant, indispensable even, to it’s proper intended use. This is just my opinion, but I’m pretty sure no one really wants a palm full of metal spider legs and skull spider mandibles when wielding a push blade. But you know, I’m just particular like that…

At least the site on which I found it had the good sense not to try and call it a push dagger. So I suppose it’s a cool blade, just so long as you aren’t planning to actually use it.

Use it…?

LOL Yeah, right. What am I thinking…

Skull Spider – [True Swords]

21
May
08

Fun With Damascus Steel

Today, I have a special treat for you. You may or may not know this, since it does not come up particularly often, but one of my favorite blade materials is Damascus steel. For two reasons. First, barring unfinished or tarnished steels, it is one of the only true “dark” finished steels that I know of.

The next reason is that, even though I have a great love for all dark weapons, (to me they have more character than most) the truth is that, most dark weapons are not inherently dark, and require special finishes, most of which rarely do any more than provide an aesthetic touch to a blade.

Damascus steel on the other hand, has an inherent dark aesthetic beauty that requires no artificial colorings or preservatives. Ok, so maybe there are some forms of Damascus that have artificial colorings. Some shades of Damascus require chemical treatments or the usage of special alloys or metals to achieve the desired effect.

But in the grand scheme of things, these are no worse than the coatings used to enhance the appearance of monosteels. Nonetheless, it is still the only type of steel that I know of, whose aesthetics are also functional, and whose enhanced cutting power does not really require any special finishes / treatments / coatings. Damascus steel has an inherent beauty all it’s own.

But the cool thing is that, in the hands of true metalworking artists, using these various other methods, Damascus can be made into patterns and colors of amazing beauty. I was quite thrilled to find a site that featured such beautifully wrought Damascus blades, each one uniquely and excellently finished to a level of detail that, much like J. A. Harkins work, totally blew me away…

I present to you a taste of the blades of Kevin and Heather Harvey of Heavin Forge. First up:

<_>

The Zulu assegai – In Damascus

Zulu Assegai in Gaboon Viper Damascus

[view full size]

Now obviously, as one of my favorite African weapons, this Damascus Assegai caught my eye. Definitely a thing of beauty. Due in no small part to the very eye catching Gaboon Viper Damascus pattern on the blade:

Zulu Assegai – Close up of Blade

Zulu Assegai Blade Close Up

[view full size]

Now this is a very unique spear, first because of the shaft style, which appears to have been carved to appear like a dark horn grip at the bottom, and smooths out the rest of the way up. Very cool. And the head sports a cool damscus pattern they have appropriately called called “Gaboon Viper”, as it emulates the characteristic diamond pattern found on the back of the aforementioned reptile… I’ve got two words for the head on this spear: Absolutely Awesome…

<^>

Persian Fighting Blade!

Persian Fighting Blade

[view full size]

If you’ve been reading my blog for any amount of time, I needn’t explain to you why I like this blade… It’s all about the points and curves… (I’m sure you can figure it out… 🙂 ) And it doesn’t hurt that it has a Damascus blade. Which is actually appropriate since Damascus steel is reputed to have been developed in ye old Persia and was also called watered steel at the time. No surprise, as Damascus does look like Steel with waves in it…

<^>

Next we have a piece i like to think of as from the West. The Wild West. California gold rush and and all that jazz… It should be self explanatory why:

Gold Rush Bowie

Gold Rush Bowie

[view full size]

Yep, we have a bowie knife, perhaps almost the trademark of the wild west, (besides the ever ubiquitous revolver), in an amazing gold and almost cobalt blue Damascus hue… I’ve always like gold accents on black blades, but this just takes it to another level altogether…

Gold Rush Bowie – Close up of ricasso and top of hilt

Gold Rush Bowie - Ricasso and Hilt

[view full size]

There’s gold in that thar bowie!… I seen it with my own two eyes!!

<^>

Finally, but certainly not least, we find a weapon harking from the dark continent of Africa, an interesting little dagger that reminds me of an insect for some reason. A long wasp maybe? I dunno. But here is it, in all it’s insect like glory…

African Dagger

African Dagger

[view full size]

Now this particularly dark brand of Damascus is one of my favorites, perhaps the only true dark steel in existence. And this sample is particularly beautiful, complementing the overall theme of this dagger very well. Between the African styled hilt, and the really very cool horn sheath, it’s perhaps one of the most intriguing implementations of a Damascus dagger I’ve seen to date…

<^>

And that’s all I’ve got for today. You can see more of Kevin and Heathers’ work at Heavin Forge. Perhaps what really impressed me was not only the creative use of color in the steel, but also the overall attention to detail, fit and finish on every weapon. Absolutely beautiful. Make sure you swing by their page.

As much as they were all great works of art, after looking at them all, I discovered I had a favorite. Probably because I tend to gravitate towards more dark colors and organic shapes, I liked that last waspy dagger best. It just spoke to me. We had a grand old chat.

I think I’m gonna give it a name. I’m calling it the Black Stinger… Yeah… In fact I think i’m gonna have to make myself similar blade one of these days. It won’t be nearly as cool as this one, but If it has half the personality, I’ll be looking forward to quite a few great conversations with it…

P.S. I’d like to point out, for the record, that I am not insane. Just a *wee bit* loopy when it comes to certain blades… But I’m totally harmless, I assure you… No really… 😛

Kevin and Heathers Damascus Blades – [Heavin Forge]

15
May
08

A Funky Spider Blade…

I’ve talked about a few weird and wacky blades in the past, but no surprise, there are an endless supply of them. Submitted for your review, yet another wacky blade, from the annals of the wacky knife kingdom:

Fantasy Spider Blade

Fantasy Spider Blade

[view full size]

Now here, we have a blade that makes no pretenses about what it is. This is a Fantasy Spider Knife. Nothing more, nothing less. And while it isn’t really my style of blade, I wish other blades could be as honest…

So basically we have a black knife, with a very curvy blade… almost too curvy. And an almost equally curvy hilt. all thoroughly imbued with a spider theme. The blade actually reminds me of a Klingon weapon, (called the tajtIq) in shape. But I digress…

The blade has a spider and web silkscreen on it, which runs into the guard, a rather… interesting… affair, with what looks like scrollwork on one side and what I can only describe as more Klingon inspired shapes on the other.

Now usually with these kinds of contorted blades, the grip is almost unusable. But Interestingly enough, it actually appears to have a workable grip, with a secondary finger guard. A rather pleasant departure from the norm. The grip itself is all atwist with some black material that I cannot readily identify, and the pommel looks almost like a lyre with a spider web, sans spider, spun between it’s arms.

To be honest this blade is not really my cup of tea. But at least it was upfront about being a nondescript “Fantasy” blade, it wasn’t trying to be something else, it actually had a good grip design, which I would have much preferred to see on some of the other similarly contorted grips I’ve seen in the past, and most importantly, it was black.

What? Hey, it’s black. I Had to at least give it the benefit of the doubt…

Fantasy Spider Blade – [True Swords]

10
Mar
08

Flying dragons with wings of shiny steel…

To paraphrase one of my favorite bloggers: G’day readers! Every now and then I run across a weapon that has me scratching my head. Today is one of those days. Allow me to introduce you to a rather unusual “dagger”:

OOOOKKKKKKK… Interesting. Now I am all about weapon being art. It can be a beautiful thing. What I do not get is how the art can be allowed to completely dictate the form of the weapon, to the extent it it more a danger to the wielder than it is to an opponent. Am I confusing you? Good. let me elaborate. Lets take a look at this “dagger” shall we?

First off, your average dagger is a short, pointed, double or single edged knife with a fairly thick blade. What is this? I dunno really. It looks like… an upside down double Ulu (an Alaskan Eskimo chopping knife)…

Hey, that’s what it looks like… I’m just saying. Ok, so maybe I’m being unfair. It is a dragon themed blade. There are two blades representing the dragons outstretched wings, between which juts the head of the dragon. The dragons body is the grip of the blade. And the pommel is a curved piece with blades that represent spikes on the dragons tail.

Ah yes. The tail. Lets talk about that spikey tail shall we? the bladed spikes that point inwards towards the wielders hands. Yeah. Those spikes. That’s what I was talking about when I pointed out that this “dagger” was a greater danger to it’s wielder. But hey, it’s art right? And art is in the eyes of the beholder. Or so they say. I have no problem with art either way. It’s when they start calling art “Daggers”, and “fantasy axes”, and “ethereal swords” and whatnot that I start getting a little antsy.

What I am trying to say, in my oh, so, subtle manner is this: Dear blade art designers, this is not a dagger. It’s an art piece. In steel. Sharp, artistically rendered steel, yes. But nothing more nor less than an object d’art. And most certainly not a dagger. At least not in any traditional sense. Not trying to belittle the art or anything, but please, for the love of all that is holy, know the difference…

Flying Dragon Dagger – [Realm Collections]




September 2020
M T W T F S S
 123456
78910111213
14151617181920
21222324252627
282930  

Subscribe The Dark Realm!

Add to My AOL